TCM812FERCTR Overview
Power management is mounted through 4 terminals. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. Please find attached TO-253-4, TO-253AA functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. IC management conducts in a 2V-voltage supply. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 4 pins on the board. There are 4 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 4.75μA volt supply current. You can always use TCM812F, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 2V power to work.
TCM812FERCTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
4.75μA operating supply current
TCM812FERCTR Applications
There are a lot of Microchip Technology TCM812FERCTR Voltage Supervisors applications.
- Battery-powered equipment
- Transformer load monitoring equipment
- Automotive power systems
- Unattended substation automation
- WiFi router
- Power distribution systems of infant care room
- Electronics installed in the vehicle
- Functional modules
- Analog circuit
- Satellite navigation
