MAX6731AUTTD3+T Overview
There are 6 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SOT-23-6 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 6. There are 6 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supply current of the power management is 15μA. It is always advisable to use MAX6731, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6731AUTTD3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6731AUTTD3+T Applications
There are a lot of Maxim Integrated MAX6731AUTTD3+T Voltage Supervisors applications.
- Microcontroller system
- Power distribution systems of ICU
- Electric heating appliances
- emergency room
- Battery-powered equipment
- Smart meter
- Transformer load monitoring equipment
- Military communications
- Insulation fault location system
- Sensitive sensors
