MAX6865UK19D6L+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 2.5V. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 5. Pin count of the power management is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6865UK19D6L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK19D6L+T Applications
There are a lot of Maxim Integrated MAX6865UK19D6L+T Voltage Supervisors applications.
- Refrigeration
- External alarm
- Household appliances
- Analog circuit
- Medical-specific insulation monitor
- Battery cars
- DVR
- Military communications
- Detection of phase sequence
- Microprocessor system
