MAX6727KAZWD3+T Overview
It is mounted through 8 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 3 channels, each of which can be used independently. Please refer to power management for SOT-23-8 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. 8 pins are present in total in this power management. The pins of the power management system count 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6727, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 1/5V watts is required for the operation of this power management.
MAX6727KAZWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6727KAZWD3+T Applications
There are a lot of Maxim Integrated MAX6727KAZWD3+T Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Detection of phase imbalance
- Insulation fault location system
- Network equipment
- Rechargeable batteries
- Automotive power systems
- Smart meter
- Cloud computing
- Electronics installed in the vehicle
- Power distribution systems of ICU
