MAX6726AKAVDD3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 3 channels, each of which can be used independently. There are SOT-23-8 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. In a 3 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 8. Power managment ic pin count is 8. IC management can only work with a supply voltage of 800mV volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. For this power management, there is an 15μA volt supply current. You can always use MAX6726A, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 1/5V volts of power.
MAX6726AKAVDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6726AKAVDD3+T Applications
There are a lot of Maxim Integrated MAX6726AKAVDD3+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- Set top box
- Automotive permanent magnet synchronous motors
- Transformer load monitoring equipment
- Electronics installed in the vehicle
- WiFi router
- Microprocessor system
- Radar
- Battery cars
- FPGA design
