MC33164DM Overview
It is mounted through 8 terminals on the power management. A Tube package is used to package the power management. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 4V-voltage supply. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 8 pins. Power managment ic pin count is 8. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using MC3*164, the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate.
MC33164DM Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MC33164DM Applications
There are a lot of Microsemi Corporation MC33164DM Voltage Supervisors applications.
- Leakage current detection
- Rechargeable batteries
- Consumer electronics
- DVR
- Insulation fault location system
- Battery cars
- Refrigeration
- emergency room
- Electrical fire monitoring system
- Urban rail transit weak current power monitoring
