MAX6724UTWGD3+T Overview
Power management is mounted through 6 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. There are a total of 3 channels on this supervisor, and they are arranged in a series. Please refer to power management for SOT-23-6 functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 3-voltage supply. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. This power management system has 6 pins. Supply voltage (Vsup) should be at least 800mV for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. It is always advisable to use MAX6724, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 1/5V volts of power.
MAX6724UTWGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6724UTWGD3+T Applications
There are a lot of Maxim Integrated MAX6724UTWGD3+T Voltage Supervisors applications.
- Insulation fault location system
- Electrical fire monitoring system
- External alarm
- Dash board
- Kitchen appliances
- Leakage protection
- Stable power system
- Precision measurement
- Power communication system
- Automotive permanent magnet synchronous motors
