MAX6724UTTGD3+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 3 channels that can be found. Please refer to power management for SOT-23-6 functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. Power management conducts at a voltage of 3. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 6 pins in it. 6 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6724, the base power ics number. There is a requirement for 1/5V power to power this power management.
MAX6724UTTGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6724UTTGD3+T Applications
There are a lot of Maxim Integrated MAX6724UTTGD3+T Voltage Supervisors applications.
- Dash board
- Efficient information transmission
- Military electronics
- External alarm
- Detection of phase imbalance
- Data storage applications
- Detection of phase loss
- Display equipment
- Fire equipment power monitoring system
- Automotive power systems
