TPS3836J25QDBVRQ1 Overview
It is mounted through 5 terminals on the power management. Packaging is in the form of a Cut Tape (CT). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, it has 5 pins on IC management. There are 5 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1.6V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 6V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 250nA volt supply current. A similar IC managements number of the manufacturer can always be found by using TPS3836J25, the base power ics number. The maximum supply temperature is 25μA. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.
TPS3836J25QDBVRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3836J25QDBVRQ1 Applications
There are a lot of Texas Instruments TPS3836J25QDBVRQ1 Voltage Supervisors applications.
- Power distribution systems of CCU
- Low voltage/high power - AI, GPU
- Solar power charger
- Refrigeration
- Magnetic resonance imaging
- Insulation fault location system
- Radio
- FPGA design
- Leakage current detection
- Stable power system
