MAX6724AUTZGD3+T Overview
It is mounted through 6 terminals on the power management. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. There are a total of 3 channels on this supervisor, and they are arranged in a series. In this IC management you will find SOT-23-6 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 3 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 6 pins in it. 6 pins are present on the power management system. It is recommended that Vsup should not be less than 800mV for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6724A, the base power ics number. The voltage supervisor requires a power source of 1/5V volts in order to work correctly.
MAX6724AUTZGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6724AUTZGD3+T Applications
There are a lot of Maxim Integrated MAX6724AUTZGD3+T Voltage Supervisors applications.
- Dash board
- Electrical fire monitoring system
- Important electronics for automotive safety
- Battery cars
- Satellite navigation
- Battery-powered equipment
- Unattended substation automation
- Military electronics
- Microprocessor system
- Urban rail transit weak current power monitoring
