STM690SDS6F Overview
There are 8 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 8 pins are located on this power management. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 60μA. A similar IC managements number of the manufacturer can always be found by using STM690, the base power ics number. In order to operate this power management, it requires 3.3/5V volts of power. The maximum supply temperature that PMIC chip can work with is 60μA.
STM690SDS6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM690SDS6F Applications
There are a lot of STMicroelectronics STM690SDS6F Voltage Supervisors applications.
- Battery cars
- Network equipment
- Medical-specific isolation transformer
- Analog circuit
- Sensitive sensors
- Detection of phase imbalance
- Data storage applications
- Power distribution systems of CCU
- Power distribution systems of operating room
- Consumer electronics
