MAX6724AUTSHD3+T Overview
There are 6 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 3 channels, each of which can be used independently. In this IC management you will find SOT-23-6 functions for you to refer to. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management is possible to find a succession of 3 voltages that have been checked. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 6 pins in it. 6 pins make up the power management. IC management can only work with a supply voltage of 800mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C degrees. Power management has an output of Push-Pull, Totem Pole during operation. In order to maintain a stable supply current for the power management, 15μA is the recommended value. You can always use MAX6724A, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 1/5V power to work.
MAX6724AUTSHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6724AUTSHD3+T Applications
There are a lot of Maxim Integrated MAX6724AUTSHD3+T Voltage Supervisors applications.
- Insulation fault location system
- Multi-voltage system
- DSP
- Network equipment
- Sensitive sensors
- DVR
- Utility meter
- Detection of phase imbalance
- Precision measurement
- Magnetic resonance imaging
