MAX6722AUTZWD3+T Overview
There are 6 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are 2 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management is possible to find a succession of 2 voltages that have been checked. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 6 pins are present in total in this power management. Power managment ic pin count is 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6722A, which is the base power ics number. It requires 1/5V watts of power to operate this voltage supervisor.
MAX6722AUTZWD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6722AUTZWD3+T Applications
There are a lot of Maxim Integrated MAX6722AUTZWD3+T Voltage Supervisors applications.
- Military electronics
- Personal computers
- Set top box
- External alarm
- Display equipment
- Precision measurement
- Sensitive sensors
- Embedded computing
- Solar power charger
- Power communication system
