CAT706SVI-GT3 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management conducts in a 3.3V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 8 pins that are attached to IC management. This power management system has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 12μA for the power management. To find similar IC managements from the manufacturer, you can always search by CAT706. Voltage supervisor can work with a supply temperature of 12μA at the most.
CAT706SVI-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
12μA operating supply current
CAT706SVI-GT3 Applications
There are a lot of ON Semiconductor CAT706SVI-GT3 Voltage Supervisors applications.
- Insulation fault location system
- Smart meter
- Functional modules
- Automotive power systems
- FPGA design
- Telecommunications equipment
- Battery cars
- External alarm
- Electric heating appliances
- Electrical fire monitoring system
