MAX6722AUTZGD3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. A series of 2 channels can be found on this supervisor. IC management is packaged as a SOT-23-6 package. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. IC management is possible to find a succession of 2 voltages that have been checked. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 6. There are 6 pins on the supervisor. IC management can only work with a supply voltage of 800mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6722A, which is the base power ics number. It is necessary to have 1/5V volts of power in order for this voltage supervisor to operate.
MAX6722AUTZGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6722AUTZGD3+T Applications
There are a lot of Maxim Integrated MAX6722AUTZGD3+T Voltage Supervisors applications.
- Leakage current detection
- Stable power system
- Electric heating appliances
- Microprocessor system
- Analog circuit
- Smart meter
- Computer applications
- Insulation fault location system
- Power distribution systems of infant care room
- Unattended substation automation
