NCP303LSN28T1 Overview
There are 5 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. Please find attached SOT-23-5 Thin, TSOT-23-5 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 240. When 1.5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. 5 pins are present in total in this power management. 5 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 500nA volt supply current. It is always advisable to use NCP303, the base supervisor number, when searching for similar PMICs from the manufacturer.
NCP303LSN28T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP303LSN28T1 Applications
There are a lot of ON Semiconductor NCP303LSN28T1 Voltage Supervisors applications.
- DVR
- Dash board
- Computer applications
- DC stabilized power supply module
- emergency room
- Personal computers
- Data storage applications
- Radar
- Embedded computing
- Multi-voltage system
