MAX6722AUTRFD3+T Overview
There are 6 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. Power management consists of 2 channels, each of which can be used independently. In this PMIC, you can find SOT-23-6 functions for your reference. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. 6 pins are present on the power management system. Supply voltage (Vsup) should be at least 800mV for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 15μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MAX6722A, the base PMIC number. To operate this power management, you will need at least 1/5V volts of power.
MAX6722AUTRFD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6722AUTRFD3+T Applications
There are a lot of Maxim Integrated MAX6722AUTRFD3+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Data storage applications
- Power distribution systems of operating room
- Functional modules
- Detection of phase sequence
- Electronics installed in the vehicle
- DSP
- External alarm
- Refrigeration
- Leakage protection
