MAX6381LT17D1+T Overview
A total of 6 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. There are 6-WDFN functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. In a 1.8V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 6 pins are located on this power management. This power management system has 6 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 7μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6381, which is the base power ics number.
MAX6381LT17D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381LT17D1+T Applications
There are a lot of Maxim Integrated MAX6381LT17D1+T Voltage Supervisors applications.
- Battery cars
- Magnetic resonance imaging
- Power distribution systems of CCU
- Digitally controlled LDO regulators circuit
- Analog circuit
- Smart meter
- Power communication system
- Urban rail transit weak current power monitoring
- Embedded computing
- Multi-voltage system
