MAX6721AUTSDD3+T Overview
A total of 6 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 2 channels. In this IC management you will find SOT-23-6 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. 6 pins are present in total in this power management. 6 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~125°C. During operation, this power management system outputs Open Drain or Open Collector. The supply current of the power management is 15μA. For similar manage ics search of the manufacturer, you can always refer to MAX6721A, the base PMIC number. This power management requires 1/5V power to work.
MAX6721AUTSDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6721AUTSDD3+T Applications
There are a lot of Maxim Integrated MAX6721AUTSDD3+T Voltage Supervisors applications.
- Electric heating appliances
- Insulation fault location system
- Important electronics for automotive safety
- Radio
- Analog circuit
- Detection of phase imbalance
- Electrical fire monitoring system
- Efficient information transmission
- Power distribution systems of CCU
- DC stabilized power supply module
