MAX6855UK39D4+T Overview
As you can see, this power management is mounted through 5 terminals. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When 2.5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. In total, it has 5 pins on IC management. The pins of the power management system count 5. Supply voltage (Vsup) should be at least 1.1V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supervisor's supply current is specified to 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6855, the base power ics number.
MAX6855UK39D4+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK39D4+T Applications
There are a lot of Maxim Integrated MAX6855UK39D4+T Voltage Supervisors applications.
- WiFi router
- Magnetic resonance imaging
- Detection of phase sequence
- Power distribution systems of ICU
- Transformer load monitoring equipment
- Efficient information transmission
- Medical-specific insulation monitor
- Medical-specific isolation transformer
- Automotive permanent magnet synchronous motors
- Analog circuit
