MAX6720AUTYHD3+T Overview
As you can see, this power management is mounted through 6 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. A series of 3 channels can be found on this supervisor. Please find attached SOT-23-6 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1V. IC management is possible to find a succession of 3 voltages that have been checked. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. 6 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 15μA. As well as this, there are other features to mention such as [0], for example. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6720A, which is the base power ics number. It is necessary to have 1/5V volts of power in order for this voltage supervisor to operate.
MAX6720AUTYHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6720AUTYHD3+T Applications
There are a lot of Maxim Integrated MAX6720AUTYHD3+T Voltage Supervisors applications.
- Efficient information transmission
- Electronics installed in the vehicle
- FPGA design
- Solar power charger
- Battery cars
- Detection of phase imbalance
- Leakage protection
- Kitchen appliances
- Power distribution systems of CCU
- External alarm
