MAX6410BS38+T Overview
There are 4 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 4-WFBGA, CSPBGA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 3V. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. There are a total of 4 pins on power management. There are 4 pins on the power managment ic. It is recommended that Vsup should not be less than 1.2V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 1μA. A similar IC managements number of the manufacturer can always be found by using MAX6410, the base power ics number.
MAX6410BS38+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6410BS38+T Applications
There are a lot of Maxim Integrated MAX6410BS38+T Voltage Supervisors applications.
- Important electronics for automotive safety
- Detection of phase imbalance
- Computer applications
- Military electronics
- Set top box
- Medical-specific insulation monitor
- Low voltage/high power - AI, GPU
- Rechargeable batteries
- Utility meter
- Urban rail transit weak current power monitoring
