MAX6716AUTSHD3+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. A series of 2 channels can be found on this supervisor. IC management is packaged as a SOT-23-6 package. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. When 1V is applied to the power ic, it conducts. IC management is possible to find a succession of 2 voltages that have been checked. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 6. 6 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 15μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX6716A. In order to operate this power management, it requires 1/5V volts of power.
MAX6716AUTSHD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6716AUTSHD3+T Applications
There are a lot of Maxim Integrated MAX6716AUTSHD3+T Voltage Supervisors applications.
- Detection of phase loss
- FPGA design
- Urban rail transit weak current power monitoring
- Utility meter
- Rechargeable batteries
- Consumer electronics
- Low voltage/high power - AI, GPU
- Personal computers
- Refrigeration
- Efficient information transmission
