MAX6464XR23+T Overview
A total of 3 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. Please find attached SC-70, SOT-323 functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3.6V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. In total, IC powers are 3 pins on the board. There are 70 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 1.3μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6464, which is the base power ics number.
MAX6464XR23+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1.3μA operating supply current
MAX6464XR23+T Applications
There are a lot of Maxim Integrated MAX6464XR23+T Voltage Supervisors applications.
- DSP
- Transformer load monitoring equipment
- Power distribution systems of ICU
- Medical-specific insulation monitor
- Magnetic resonance imaging
- Leakage current detection
- Microcontroller system
- WiFi router
- Automotive permanent magnet synchronous motors
- Detection of phase sequence
