MAX6875ETJ+T Overview
This power management consists of 32 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are 4 channels on this power managment ic that can be found in a series. IC management is packaged as a 32-WFQFN Exposed Pad package. There are a lot of similarities between this IC management and other Sequencer products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 4. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 32 pins in it. 32 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 4V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 13.2V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. As far as the supply current of the power management is concerned, it is 1.3mA. A similar IC managements number of the manufacturer can always be found by using MAX6875, the base power ics number. The power management must be powered by 3/56/13V volts to function properly.
MAX6875ETJ+T Features
Sequencer type
Minimum supply voltage of 4V
1.3mA operating supply current
MAX6875ETJ+T Applications
There are a lot of Maxim Integrated MAX6875ETJ+T Voltage Supervisors applications.
- Multi-voltage system
- Personal computers
- Power distribution systems of operating room
- Telecommunications equipment
- Detection of phase sequence
- Display equipment
- Detection of phase loss
- Leakage current detection
- Consumer electronics
- Smart meter
