MAX6440UTKSRD3+T Overview
The SOT-23-6 package is suitable for battery instrument. A system battery like this uses an analog IC named POWER SUPPLY SUPPORT CIRCUIT. As of right 2w, there are 2 channels available. There are 6 pins on it. For mounting, use Surface Mount. A minimum supply voltage of 1V volts is required for this electric part. An electrical component of the type Power Management Circuits can be found here. It is recommended that the power IC's supply voltage not exceed 5.5V volts. In order for this system battery to be activated, its value cannot be less than 0. Using it below 85°C temperatures is recommended. Power comes from a 1.2/5V volt source. The pins on it total 6. Battery protection ICs should have a minimum reset threshold voltage under 2.563V. The min reset threshold voltage of the battery protection IC should above 2.438V.
MAX6440UTKSRD3+T Features
Available in SOT-23-6 Package
with 6 Pins
The Min Reset Threshold Voltage at 2.438V
MAX6440UTKSRD3+T Applications
There are a lot of Maxim Integrated MAX6440UTKSRD3+T Battery Management ICs applications.
- Utility vehicles
- Autonomous vehicles
- xEV charging station (off-board charger)
- Aviation ground support systems
- LED lighting
- Non-road type vehicles
- Rear light with animation
- 3-wheelers
- Grid power infrastructure
- Motor drive - 3 phase AC400V inverter
