MAX6431OTUS+T Overview
The SOT-143-4 package is suitable for battery instrument. This power IC uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT. There are 1 channels available. The smart tools battery has 4 pins in total. Mount this electronic part using Surface Mount. In order for this electric part to operate properly, its supply voltage must not be lower than 1.6V volts. The electronic component belongs to the Power Management Circuits family. If you want to activate this system battery, it must be at least -40°C. A temperature below 85°C is suggested for use. A 1.2/5V volt supply powers it. Ensure that this battery management IC is always set to 3.7V. On it, there are 4 pins. The minimum reset threshold voltage of the manage ICs should under 5.5V. Battery protection ICs should have a minimum reset threshold voltage above 1.2V. Supply current (Isup) must not exceed 0.0015mA. This system battery's operating supply voltage falls within the range of 5.5V.
MAX6431OTUS+T Features
Available in SOT-143-4 Package
with 4 Pins
operate supply voltage at the range of 3.7V
The Min Reset Threshold Voltage at 1.2V
MAX6431OTUS+T Applications
There are a lot of Maxim Integrated MAX6431OTUS+T Battery Management ICs applications.
- DC/DC converter
- Multicopter and drones
- Front light
- Chargers 30 kW to 150 kW
- Power tools
- Home appliances
- Hybrid electric vehicles
- A/C power substations
- Motor drive - single phase AC100V-240V non -isolated
- Internet infrastructure equipment
