MAX6431NSUS+T Overview
The SOT-143-4 package is suitable for battery instrument. A system battery like this uses an analog IC named POWER SUPPLY SUPPORT CIRCUIT. We have 1 channels available. 4 pins are attached to it. It is recommended that you mount this electrical component using Surface Mount. The voltage supply for this electric component should not be less than 1.6V volts. The family name of this electrical component is Power Management Circuits. In order for this system battery to be activated, its value cannot be less than 0. A temperature below 85°C is recommended for its use. The battery protector ic is powered by a volt of 1.2/5V. You should leave this transceiver ic set to 3.7V at all times. The power IC has a total of 4 pins. Battery protection ICs should have a minimum reset threshold voltage under 5.5V. A minimum reset threshold voltage of 1.2V should be exceeded by the power management IC. (Isup) must have a maximum current of 0.0015mA. This system battery's operating supply voltage falls within the range of 5.5V.
MAX6431NSUS+T Features
Available in SOT-143-4 Package
with 4 Pins
operate supply voltage at the range of 3.7V
The Min Reset Threshold Voltage at 1.2V
MAX6431NSUS+T Applications
There are a lot of Maxim Integrated
MAX6431NSUS+T Battery Management ICs applications.
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
- Solar and wind-generating plants
- Electric street sweepers
- Shuttle robots
- Robots
