MAX6430NRUS+T Overview
This package corresponds to SOT-143-4. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this power management IC. It is possible to access 1 channels. The smart tools battery has 4 pins in total. Mount this electronic part using Surface Mount. It is recommended that this electric part's minimum supply voltage not be less than 1.6V volts. An electrical component of the type Power Management Circuits can be found here. You cannot activate this smart tools battery if it is less than -40°C. The electronic battery should be used below 85°C degrees Celsius. The manage ICs is powered by an electric current of 1.2/5V volts. All times this battery protection IC should be set to 3.7V. 4 pins are present on it. There should be a voltage below 5.5V as the minimum reset threshold voltage for the battery protector ic. Power ICs should have a reset threshold voltage above 1.2V. Ensure that the maximum supply current (Isup) is below 0.0015mA. A voltage of 5.5V is specified as the operating supply voltage for this battery instrument.
MAX6430NRUS+T Features
Available in SOT-143-4 Package
with 4 Pins
operate supply voltage at the range of 3.7V
The Min Reset Threshold Voltage at 1.2V
MAX6430NRUS+T Applications
There are a lot of Maxim Integrated
MAX6430NRUS+T Battery Management ICs applications.
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
