MAX6428NTUR+T Overview
A SOT-23-3 package would be appropriate for this. IC POWER SUPPLY SUPPORT CIRCUIT is the system battery's analog IC. The available channels are 1. Currently, there are 3 pins on it. Surface Mount is the mount number for this electronic part. A minimum supply voltage of 1.6V volts is required for this electric part. Power Management Circuits is a family of electronic parts. It must be greater than -40°C to activate this system battery. Temperatures below 85°C are recommended. There is a 1.2/5V volt power source. It is recommended that this battery protection IC be set to 3.7V at all times. Total number of pins is 3. Ideally, the battery protector ic should have a reset threshold voltage below 5.5V. Minimum reset threshold voltage of the power management IC should be above 1.2V. Unless specified otherwise, Isup (the maximum supply current) must not exceed 0.0015mA. It is specified that the operating supply voltage for this battery instrument is 5.5V.
MAX6428NTUR+T Features
Available in SOT-23-3 Package
with 3 Pins
operate supply voltage at the range of 3.7V
The Min Reset Threshold Voltage at 1.2V
MAX6428NTUR+T Applications
There are a lot of Maxim Integrated
MAX6428NTUR+T Battery Management ICs applications.
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
- Solar and wind-generating plants
