MAX6428NSUR+T Overview
It belongs to package SOT-23. This system battery uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. Channels available are 1. Total pins are 3. The electrical component must be mounted with Surface Mount. A voltage of at least 1.6V volts is required on this electric component. Electronic parts in the Power Management Circuits family are found here. If you want to activate this system battery, it must be at least -40°C. Temperatures less than 85°C degrees Celsius are recommended for use. A 1.2/5V volt supply powers it. It is imperative to keep this transceiver ic set to 3.7V at all times. In total, it has 3 pins. A battery management IC's minimum reset threshold voltage should be less than 5.5V. There should be a minimum reset threshold voltage over 1.2V on the power management IC. A maximum of 0.0015mA current must be available from the supply (Isup). For this smart tools battery, the operating supply voltage is specified as being in the range of 5.5V.
MAX6428NSUR+T Features
Available in SOT-23 Package
with 3 Pins
operate supply voltage at the range of 3.7V
The Min Reset Threshold Voltage at 1.2V
MAX6428NSUR+T Applications
There are a lot of Maxim Integrated
MAX6428NSUR+T Battery Management ICs applications.
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
- Solar and wind-generating plants
- Electric street sweepers
- Shuttle robots
