MAX6411BS43+T Overview
It is mounted through 4 terminals on the power management. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. There are 4-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3V supply voltages. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. Taking into account all of the pins, this power management has a total of 4. 4 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. As far as the supply current of the power management is concerned, it is 1μA. For similar manage ics search of the manufacturer, you can always refer to MAX6411, the base PMIC number.
MAX6411BS43+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6411BS43+T Applications
There are a lot of Maxim Integrated MAX6411BS43+T Voltage Supervisors applications.
- Rechargeable batteries
- Consumer electronics
- Electronics installed in the vehicle
- Power distribution systems of CCU
- Personal computers
- Important electronics for automotive protection
- DVR
- Fire equipment power monitoring system
- Smart meter
- Battery cars
