MAX6404BS42+T Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 4-WFBGA, CSPBGA functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. It has a total of 4 pins that are attached to IC management. This power management system has 4 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 1μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6404, which is the base power ics number.
MAX6404BS42+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current
MAX6404BS42+T Applications
There are a lot of Maxim Integrated MAX6404BS42+T Voltage Supervisors applications.
- Smartphones
- Automotive permanent magnet synchronous motors
- Functional modules
- Microcontroller system
- Stable power system
- Consumer electronics
- Computer applications
- Urban rail transit weak current power monitoring
- Power communication system
- DC stabilized power supply module
