CAT1640LI-30-G Overview
It is mounted through 8 terminals on the power management. It is packaged with Tube. Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. By Through Hole, IC management has been mounted. The total number of pins on this power management is 8. 8 pins are present on the power management system. It is recommended that Vsup should not be less than 3V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Through HoleThe temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 3mA. As well as this, there are other features to mention such as [0], for example. It is always advisable to use CAT1640, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 3mA.
CAT1640LI-30-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current
CAT1640LI-30-G Applications
There are a lot of ON Semiconductor CAT1640LI-30-G Voltage Supervisors applications.
- Unattended substation automation
- Cloud computing
- Sensitive sensors
- Efficient information transmission
- Power distribution systems of infant care room
- Battery-powered equipment
- Multi-voltage system
- Rechargeable batteries
- Display equipment
- Leakage protection
