MAX6394US445D3+T Overview
There are 4 terminals connected to this power management, which makes it easy to mount. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes TO-253-4, TO-253AA functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During operation, the power ic is supplied with a voltage of 3.6V. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 4 pins in it. There are 4 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use MAX6394, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 3/5V watts is required for the operation of this power management. The maximum supply temperature voltage supervisor can handle is 15μA.
MAX6394US445D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6394US445D3+T Applications
There are a lot of Maxim Integrated MAX6394US445D3+T Voltage Supervisors applications.
- Electrical fire monitoring system
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
- Automotive permanent magnet synchronous motors
- Microcontroller system
- Utility meter
- Radio
- Dash board
- Low voltage/high power - AI, GPU
- emergency room
