MAX16016PTBW+T Overview
A total of 10 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 10-WFDFN Exposed Pad functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT SPECIFIED. During operation, the power ic is supplied with a voltage of 1.62V. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 10 pins on the board. Pin count of the power management is 10. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by MAX16016.
MAX16016PTBW+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
MAX16016PTBW+T Applications
There are a lot of Maxim Integrated MAX16016PTBW+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Unattended substation automation
- Leakage current detection
- Electrical fire monitoring system
- emergency room
- DVR
- Detection of phase loss
- Microcontroller system
- Important electronics for automotive protection
- FPGA design
