MAX6725KASDD3+T Overview
Power management is mounted through 8 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. A series of 3 channels can be found on this supervisor. In this IC management you will find SOT-23-8 functions for you to refer to. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 3 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C. While this power management is operating, it will output Open Drain, Open Drain as the output voltage. The power management's supply current is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6725, which is the base power ics number. This power management requires 1/5V power to work.
MAX6725KASDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6725KASDD3+T Applications
There are a lot of Maxim Integrated MAX6725KASDD3+T Voltage Supervisors applications.
- External alarm
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Military electronics
- Power communication system
- Dash board
- Battery cars
- Digitally controlled LDO regulators circuit
- Electrical fire monitoring system
- DVR
