Name: MAX6394US240D4+T
Brand: Maxim Integrated
SKU: MAX6394US240D4+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-253-4, TO-253AA
Number of Pins	4
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2008
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	4
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Subcategory	Power Management Circuits
Max Power Dissipation	320mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	3.6V
Base Part Number	MAX6394
Output	Open Drain or Open Collector
Pin Count	4
Power Supplies	3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Max Supply Current	15μA
Adjustable Threshold	YES
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	2.4V
Number of Voltages Monitored	1
Reset Timeout	826ms Minimum
Min Reset Threshold Voltage	2.386V
Max Reset Threshold Voltage	2.414V
Length	2.92mm
RoHS Status	ROHS3 Compliant

MAX6394US240D4+T Product Details

MAX6394US240D4+T Overview

There are 4 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-253-4, TO-253AA functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During operation, the power ic is supplied with a voltage of 3.6V. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 4 pins that are attached to IC management. This power management system has 4 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is always advisable to use MAX6394, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. Voltage supervisor can work with a supply temperature of 15μA at the most.