MAX6384XS27D3+T Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Packaged in the form of a Strip, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-82A, SOT-343 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 1.8V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 4 pins in it. There are 4 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 7μA.
MAX6384XS27D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6384XS27D3+T Applications
There are a lot of Maxim Integrated MAX6384XS27D3+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Functional modules
- Data storage applications
- Power distribution systems of ICU
- Digitally controlled LDO regulators circuit
- Detection of phase imbalance
- Smart meter
- WiFi router
- DSP
- Efficient information transmission
