ADM1816-5AKS-REEL7 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-70, SOT-323 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 240. A supply voltage of 5V is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. Pin count of the power management is 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. Supplied with a operating current of 16μA, this PMIC is capable of fully function as specified. You can always use ADM1816, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 16μA. There are 1 inputs monitored at once on the power management.
ADM1816-5AKS-REEL7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1816-5AKS-REEL7 Applications
There are a lot of Analog Devices Inc. ADM1816-5AKS-REEL7 Voltage Supervisors applications.
- Medical-specific insulation monitor
- Precision measurement
- Transformer load monitoring equipment
- DSP
- External alarm
- Leakage current detection
- emergency room
- Military electronics
- Detection of phase imbalance
- Detection of phase sequence
