MAX6384LT16D4+T Overview
A total of 6 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 6-WFDFN package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1.8V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 6 pins on power management. Power managment ic pin count is 6. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 7μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6384, the base power ics number.
MAX6384LT16D4+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6384LT16D4+T Applications
There are a lot of Maxim Integrated MAX6384LT16D4+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Battery cars
- Military communications
- Transformer load monitoring equipment
- Satellite navigation
- Detection of phase sequence
- Electrical fire monitoring system
- External alarm
- Embedded computing
- Low voltage/high power - AI, GPU
