MAX6855UK18D1+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. In a 2.5V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. 5 pins are present in total in this power management. Pin count of the power management is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 7μA for the power management. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6855UK18D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK18D1+T Applications
There are a lot of Maxim Integrated MAX6855UK18D1+T Voltage Supervisors applications.
- Functional modules
- Leakage protection
- Detection of phase imbalance
- Important electronics for automotive safety
- Smart meter
- Multi-voltage system
- Kitchen appliances
- Power distribution systems of CCU
- Military communications
- Stable power system
