MAX6382XR22D3+ Overview
A total of 3 terminals are used to mount this power management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SC-70, SOT-323 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management conducts in a 1.8V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation.
MAX6382XR22D3+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6382XR22D3+ Applications
There are a lot of Maxim Integrated MAX6382XR22D3+ Voltage Supervisors applications.
- Power communication system
- emergency room
- Computer applications
- Detection of phase sequence
- Microprocessor system
- Rechargeable batteries
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Magnetic resonance imaging
- Analog circuit
