TC1273-5ENBTR Overview
There are 3 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 5V volt supply. Power ics operate at 1 supply voltages. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. 3 pins are present on the power management system. It is recommended that Vsup should not be less than 1.2V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 700μA. For similar manage ics search of the manufacturer, you can always refer to TC1273, the base PMIC number.
TC1273-5ENBTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
700μA operating supply current
TC1273-5ENBTR Applications
There are a lot of Microchip Technology TC1273-5ENBTR Voltage Supervisors applications.
- Embedded computing
- Military electronics
- Insulation fault location system
- Cloud computing
- External alarm
- Radio
- DVR
- Consumer electronics
- FPGA design
- Electrical fire monitoring system
