MAX6381XR17D3-T Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. Please find attached SC-70, SOT-323 functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 245. IC management conducts in a 1.8V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. Pin count of the power management is 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 7μA is the recommended value. It is always advisable to use MAX6381, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6381XR17D3-T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381XR17D3-T Applications
There are a lot of Maxim Integrated MAX6381XR17D3-T Voltage Supervisors applications.
- Utility meter
- Insulation fault location system
- Microprocessor system
- External alarm
- Leakage protection
- DC stabilized power supply module
- DVR
- Medical-specific isolation transformer
- Urban rail transit weak current power monitoring
- Battery cars
