BD46305G-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. This IC power shares lots of benefits with other Voltage Detector products. IC management conducts at a voltage of 5V. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 5 pins. Pin count of the power management is 5. IC management can only work with a supply voltage of 950mV volts. The supply voltage (Vsup) should not exceed 9.5V volts in this IC power. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In addition, IC management are other features such as [0], to mention only a few. For similar manage ics search of the manufacturer, you can always refer to BD46, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 2.85μA. As you can see, this IC power comes from the well-known BD46xxx series of products.
BD46305G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD46305G-TR Applications
There are a lot of ROHM Semiconductor BD46305G-TR Voltage Supervisors applications.
- Functional modules
- Set top box
- Leakage protection
- Magnetic resonance imaging
- Precision measurement
- Power distribution systems of CCU
- Important electronics for automotive protection
- DC stabilized power supply module
- Insulation fault location system
- Power distribution systems of infant care room