MAX6381LT39D4+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a 6-WFDFN package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. When 1.8V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. A total of 6 pins are located on this power management. This power management system has 6 pins. It is recommended that Vsup should not be less than 1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 7μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.
MAX6381LT39D4+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381LT39D4+T Applications
There are a lot of Maxim Integrated MAX6381LT39D4+T Voltage Supervisors applications.
- Microprocessor system
- Multi-voltage system
- Smartphones
- Insulation fault location system
- Network equipment
- FPGA design
- DSP
- Detection of phase sequence
- emergency room
- Power communication system
