CAT1022LI-30-G Overview
A total of 8 terminals are used to mount this power management. There is a Tube-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be NOT SPECIFIED. In a 3.3V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Through Hole. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2.7V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Through Hole mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. As far as the supply current of the power management is concerned, it is 3mA. There are also other features in the software such as [0], just to mention a few. To find similar IC managements from the manufacturer, you can always search by CAT1022. A maximum supply temperature of 3mA can be used.
CAT1022LI-30-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1022LI-30-G Applications
There are a lot of ON Semiconductor CAT1022LI-30-G Voltage Supervisors applications.
- Leakage protection
- Microprocessor system
- Analog circuit
- DSP
- Personal computers
- Battery cars
- DC stabilized power supply module
- Urban rail transit weak current power monitoring
- Solar power charger
- Consumer electronics
