MAX6381LT25D3+T Overview
There are 6 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. There are 6-WDFN functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 1.8V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 6 pins on power management. 6 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 7μA volt supply current. You can always use MAX6381, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6381LT25D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381LT25D3+T Applications
There are a lot of Maxim Integrated MAX6381LT25D3+T Voltage Supervisors applications.
- Detection of phase loss
- Power distribution systems of operating room
- Battery cars
- Stable power system
- Dash board
- Electronics installed in the vehicle
- Military electronics
- Power communication system
- Smart meter
- Cloud computing
