MAX6359RVUT+T Overview
As you can see, this power management is mounted through 6 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. In a 5V supply voltage, the power management conducts. IC management conducts in a 2-voltage supply. The mount is provided by Surface Mount. It has a total of 6 pins that are attached to IC management. There are 6 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 20μA for the power management. It is always advisable to use MAX6359, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6359RVUT+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
20μA operating supply current
MAX6359RVUT+T Applications
There are a lot of Maxim Integrated MAX6359RVUT+T Voltage Supervisors applications.
- Satellite navigation
- Electronics installed in the vehicle
- Automotive power systems
- Smart meter
- Battery-powered equipment
- Electrical fire monitoring system
- Transformer load monitoring equipment
- DSP
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
